Форум А. Лихницкого  
Перейти_на_сайт_Лихницкого_Сквозь асфальт
Перейти_в_интернетмагазин_записей_Лихницкого

Вернуться   Форум А. Лихницкого > 3. Оборудование воспроизведения > Аналоговые источники
Регистрация Справка Пользователи Календарь Поиск Сообщения за день Все разделы прочитаны

Аналоговые источники Головки звукоснимателя, тонармы, проигрыватели Lp и пластинок на 78 об/мин - обсуждение конструкций

Ответ
 
Опции темы Поиск в этой теме Опции просмотра
Старый 03.01.2014, 19:10   #11
FranzUSSR
http://franzussr.blogspot
 
Аватар для FranzUSSR
 
Регистрация: 30.05.2011
Адрес: tver
Возраст: 57
Сообщений: 1,057
По умолчанию Ответ: Виниловый стол Тома Флетчера

Когда у него нашли рак он продал фирму,потом сделал Флетчер аудио и скоро представился
насчет направления кстати Флетчер сделал его ,учитесь ребята
With its unique and quite remarkable plinth made out of an historical piece of Pitch Pine. The wood was originally 1 meter squared and several meters long. Tom sliced it up into pieces of about 20 x 20 x 2cm and then glued the slices back together again but gave them a slight twist through their center each time before machining it into its log shaped plinth thus giving the new “log” a spiraling effect. All this work was done with only one thing in mind – controlling the travel of resonances. Because of this limited supply of the right wood, there are not so many original Anna´s around

правда сосна уже не смолистая, а "жесткая"
http://ru.wikipedia.org/wiki/%D0%A1%...BA%D0%B0%D1%8F
FranzUSSR вне форума   Ответить с цитированием
Старый 03.01.2014, 19:35   #12
Федор Конь
Пользователь
 
Регистрация: 27.07.2008
Адрес: Вильнюс
Сообщений: 647
По умолчанию Ответ: Виниловый стол Тома Флетчера

Не знаю не знаю.. тонковат подшибник для 18-ти кг диска, брус клееный из пиленных по разному ламелей, судя по фото, это уже выраженный резонанс от сэндвича с клеевой прокладкой, плюс сама форма прогнутого бруса. Дохлый движок, резиновый пассик на пластиковым ролике - возможно идеальная вертушка для современных стереопластинок с прижимом в 1 гр. но не более. С 45-ой сразу ощутите выраженный окрас звучания, а про старое -моно лучше вообще не упоминать.
Федор Конь вне форума   Ответить с цитированием
Старый 03.01.2014, 19:44   #13
FranzUSSR
http://franzussr.blogspot
 
Аватар для FranzUSSR
 
Регистрация: 30.05.2011
Адрес: tver
Возраст: 57
Сообщений: 1,057
По умолчанию Ответ: Виниловый стол Тома Флетчера

подшипник сделан по принципу линна 12 без шарика ,только ось упирается не на плоскую поверхность, а положенный на ролик от роликоподшипника
FranzUSSR вне форума   Ответить с цитированием
Старый 03.01.2014, 19:48   #14
FranzUSSR
http://franzussr.blogspot
 
Аватар для FranzUSSR
 
Регистрация: 30.05.2011
Адрес: tver
Возраст: 57
Сообщений: 1,057
По умолчанию Ответ: Виниловый стол Тома Флетчера

дохлый не дохлый ,но скорость держит идеально ,кстати как апгрейд предлагался регенератор питания с еще более точной подстройкой
FranzUSSR вне форума   Ответить с цитированием
Старый 03.01.2014, 19:50   #15
FranzUSSR
http://franzussr.blogspot
 
Аватар для FranzUSSR
 
Регистрация: 30.05.2011
Адрес: tver
Возраст: 57
Сообщений: 1,057
По умолчанию Ответ: Виниловый стол Тома Флетчера

по мне Анна Лог просто на две головы выше по качеству воспроизведения музыки , чем например ЕМТ930 который звучит просто, как старый трактор
FranzUSSR вне форума   Ответить с цитированием
Старый 03.01.2014, 19:53   #16
Федор Конь
Пользователь
 
Регистрация: 27.07.2008
Адрес: Вильнюс
Сообщений: 647
По умолчанию Ответ: Виниловый стол Тома Флетчера

Цитата:
Сообщение от FranzUSSR Посмотреть сообщение
подшипник сделан по принципу линна 12 без шарика ,только ось упирается не на плоскую поверхность, а положенный на ролик от роликоподшипника
Так там подшибник от Линна? ТОгды ой Ещё бы шарик, иначе вал бы там давно вырыл яму. Короче типичный Хайдэнд. Не обижайся,Franz, но нефиг здесь хаять червяки. Поставь какой-нить рояль на 45-ке, послушаем Анну
Федор Конь вне форума   Ответить с цитированием
Старый 03.01.2014, 19:58   #17
FranzUSSR
http://franzussr.blogspot
 
Аватар для FranzUSSR
 
Регистрация: 30.05.2011
Адрес: tver
Возраст: 57
Сообщений: 1,057
По умолчанию Ответ: Виниловый стол Тома Флетчера

читать не умеем по принципу, а не от Линна червяки я не хаю це под 78 оборотов
FranzUSSR вне форума   Ответить с цитированием
Старый 03.01.2014, 19:58   #18
Федор Конь
Пользователь
 
Регистрация: 27.07.2008
Адрес: Вильнюс
Сообщений: 647
По умолчанию Ответ: Виниловый стол Тома Флетчера

Цитата:
Сообщение от FranzUSSR Посмотреть сообщение
дохлый не дохлый ,но скорость держит идеально ,кстати как апгрейд предлагался регенератор питания с еще более точной подстройкой
А смысл? Добавить больше модуляций^? Регенераторы на 5-ваттние DC моторы это круто.
Федор Конь вне форума   Ответить с цитированием
Старый 03.01.2014, 20:16   #19
FranzUSSR
http://franzussr.blogspot
 
Аватар для FranzUSSR
 
Регистрация: 30.05.2011
Адрес: tver
Возраст: 57
Сообщений: 1,057
По умолчанию Ответ: Виниловый стол Тома Флетчера

АС мото для начала а не DC
Флетчер объяснял так
Why a power supply? But first, why an AC turntable motor?
Nottingham Analogue turntables excel by virtue of their almost elemental simplicity, relying as they do on the fact that a rotating
platter will continue to do so at absolutely constant speed unless acted upon by outside forces. By coupling this steadily rotating
mass to an arm base that is stable around the axis of rotation of the platter, the result is a truly integrated unit.
By giving the platter adequate moment of inertia, the effects of any variability in outside forces are minimized.
However, the most important force, bearing friction, should if the bearing is correctly made and lubricated remain essentially constant;
hence, all that is required is to supply a small amount of energy to the platter at a constant rate – just sufficient to counter the
friction and maintain a steady speed.
DC motors and their highly developed control systems may rightly dominate the small motor market for “movement and placement”
applications such as robotics, but are they what we need in order to maintain this steady state? For this purpose, an AC synchronous
motor backed by the “mass” of the National Grid should be the answer. Unfortunately, although the laws of mechanics show no sign
of changing, electricity supplies are – and apparently always for the worse. There are four main areas of concern.
1. Voltage variations
As a case in point, since “harmonizing” with the rest of the EC, the nominal UK domestic supply voltage has fallen from 240V to 230V,
but the permissible range of voltage has increased vastly, now being from –6% (216.2V) to +10% (253V). This whole range will not
be seen in any one locality, but wide variations do occur between different areas.
For an AC synchronous motor, such voltage variations will not affect its overall speed, but will affect its torque: not what we need for onstant energy input (torque x speed = power). In addition, the absolute voltage level has a very distinct effect on the dynamics and
detail of the music, with a clearly audible optimum voltage range. We need, then, to be able to optimize the motor supply voltage and
to hold it stable
2. Frequency variations
These, by definition, will directly affect the speed of a synchronous motor. Supply frequency variations are generally slow, but are
easily demonstrated using an independent precision strobe illuminator such as the “Zapper”.
Permissible variation in the UK is +/- 1% (6% equates to a semitone). Over 24 hours the frequency must average exactly 50Hz to
satisfy users of synchronous clocks, so that if the frequency is slow at one point in the 24 hours, it must be fast at some other point
as night follows day (sometimes literally!). For a power supply, some slight adjustment of frequency is desirable for pitch purposes
but once set, it must remain stable.
3. Supply waveform
This is an aspect that has been becoming universally and insidiously more of a problem over the years largely as a result of the
“switched mode” power supplies that have generally supplanted transformers in much modern electronic equipment.
The supply waveform does not now have a clean sinusoidal shape, but shows drastically clipped peaks – the equivalent of adding
numerous high order harmonics to the fundamental 50 or 60 Hz. These can be shown to exist at significant levels far up into the audio
frequency range, and even if attenuated by damping in the drive belt will still feed through to the platter. We need to synthesize a new
clean waveform; “filtering” is not an answer.
4. Voltage spikes, and other “hash”
These are another part of the fallout from the volume and complexity of modern consumer demands, and are sufficiently worrying to
have provoked restrictive regulations on equipment manufacturers. Our AC motor supply needs to be free of all such intrusions.
FranzUSSR вне форума   Ответить с цитированием
Старый 03.01.2014, 20:30   #20
FranzUSSR
http://franzussr.blogspot
 
Аватар для FranzUSSR
 
Регистрация: 30.05.2011
Адрес: tver
Возраст: 57
Сообщений: 1,057
По умолчанию Ответ: Виниловый стол Тома Флетчера

Записал кусочек Билла Эванса,
новодел на 45 оборотах , я не долюбливаю эти пластинки
http://www.youtube.com/watch?v=h15iY-7j7XA
FranzUSSR вне форума   Ответить с цитированием
Ответ


Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск
Опции просмотра

Ваши права в разделе
Вы не можете создавать темы
Вы не можете отвечать на сообщения
Вы не можете прикреплять файлы
Вы не можете редактировать сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.
Быстрый переход


Часовой пояс GMT +4, время: 18:49.


vBulletin® Version 3.6.8.
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Перевод: zCarot