Интересует дат рекордер SONY DTC-2000 ES, как цап в первую очередь и как способ сохранения аналога, во вторую! Кто что думает по этому дивайсу?
http://www.datrecorders.co.uk/dtc2000es.php
Specifications:
Tape Digital audio tape
Recording head Rotary head
Recording time Standard: 120 minutes
Long-play mode: 240 minutes (with DT-120)
Tape speed Standard: 8.15 mm/s
Long-play mode: 4.075 mm/s
Drum rotation Standard: 2000 rpm
Long-play mode: 1000rpm
Error correction Double-Read Solomon code
Track pitch 13.6 ms (20.4ms)
Sampling frequency 48kHz, 44.1kHz, 32kHz
Modulation system 8 - 10 Modulation
Transfer rate 2.46 Mbit/sec
Number of channels 2 channels, stereo
D/A conversion Standard: 16-bit linear
(Quantization) Long-play mode: 12-bit non-linear
Frequency response Standard: 2-20000 Hz (+- 0.5dB)
Long-play mode: 2-14500 Hz (+- 0.5dB)
Signal-to-noise ratio Standard: more than 94 dB
Long-play mode: more than 94 dB
Dynamic range Standard: more than 94 dB
Long-play mode: more than 94 dB
Total harmonic distortion
Standard: less than 0.0035% (1 kHz)
Long-play mode: less than 0.075% (1 kHz)
Wow and flutter Below measurable limit (+-0.0001% W.PEAK)
Inputs Jack type Inpedance Rated input level
Line in Phono jack (2xRCA) 47 kilohms -4dB
Digital in Phono jack (RCA) 75 ohms 0.5 Vp-p, +-20%
Digital in Optical jack - -
Digital in Optical jack - -
MIC Phono jack (2xJack) 47 kilohms -44dB
Outputs Jack type Inpedance Rated input level Load Impedance
Line out Phono jack (2xRCA) 470 ohms -4dB More than 10 kilohms
Phones Stereo phone jack 220 ohms 1.3 mW 32 ohms
Digital out Phono jack (RCA) 75 ohms 0.5 Vp-p, +-20% 75 ohms
Digital out Optical jack - - -
Digital out (Optical jack) wavelength: 660nm
Power requirements 120 V AC, 60 Hz
Power consumption 50W
Dimensions (WxHxD) approx 470x135x380mm
Mass approx 12.5 kg